BRISTOL F.2B by Chema Martinez “In Memory of Those Who Never Returned” This is one of my latest completed project, built entirely from plans — 100% scratch. Without a doubt, it has been my greatest moBristol F.2B 1/32 by Wingnut Wings, with a fully reworked engine section and a Roden engine replacement. In memory of Lieutenant Juan Moneo and Sergeant Jesús Cartagena. This Bristol F.2B belonged to the First Squadron and was based at the Tauima airfield in 1925. It was flown by Lieutenant Juan Moneo, with Sergeant Jesús Cartagena serving as the bomber. In the early morning of April 19th, 1925, several aircraft took off from Tauima airfield to fly over the rebel market taking place in Benibuyari del Llano. The aviators descended to low altitude and strafed numerous tribesmen, forcing them to flee. Aircraft M-MRAX B-24, piloted by Lieutenant Moneo with Sergeant Cartagena as bombardier, pursued a group of rebels, engaging them with machine-gun fire. However, a concentrated burst from enemy rifles seriously wounded both men. The aircraft, now out of control, entered a spin and crashed violently into a nearby ravine. Both aviators likely died on impact. In a rescue attempt, forces from the *Harca de Vareja* advanced into hostile territory—about three kilometers from the position at Azib de Midar—recovering the bodies of the fallen. Unable to retrieve the aircraft, they set it on fire to prevent its capture. Other pilots flew overhead, dropping bombs to keep the rebels at a distance. The bodies were brought to the Red Cross hospital, where their comrades kept vigil through the night. Lieutenant Moneo was a close friend of Lieutenant Muñoz, who had died in the same area just days earlier, under similar circumstances. Upon learning of the tragedy, the airfield commander, Fernández, and Lieutenant Lastra flew immediately to Azib de Midar. BRISTOL F.2B by Chema Martinez BRISTOL F.2B by Chema Martinez BRISTOL F.2B by Chema Martinez BRISTOL F.2B by Chema Martinez BRISTOL F.2B by Chema Martinez BRISTOL F.2B by Chema Martinez “Their wings fell before their courage did — may this model keep alive the memory of those who gave everything in the skies of Tauima.” — Chema M.
LVG C.VI
LVG C.VI by Chema Martinez “The Silent Eyes of the Western Front” The LVG C.VI was a reconnaissance aircraft built by Luftverkehrsgesellschaft in 1917 — the company from which its initials derive. The aircraft was designed by Willy Sabersky-Müssigbrodt. Developed from the earlier C.V model, the C.VI was lighter, smaller, and more refined, even though its fuselage appeared more solid. It was a biplane built mostly of mixed wood construction; the fuselage used a semi-monocoque plywood skin. The rectangular wings were made of wood and metal and covered with fabric. The upper wing had a slightly greater span than the lower one, and the fin was plywood-covered wood, while the rudder and elevators were wooden framed and fabric-covered. It was powered by a six-cylinder Benz Bz.IV water-cooled engine producing 200 hp, giving it a top speed of 170 km/h and a service ceiling of 6,500 meters. The engine radiator was mounted in the central section of the upper wing. Armament consisted of two machine guns — one fixed Spandau LMG 08/15 and, depending on the version, either a Parabellum LMG 14/17 or a Parabellum LMG 14 mounted on a flexible ring for the observer. It featured a fixed landing gear and a tailskid. The aircraft was equipped with a Morse radio that could only transmit, using an antenna deployed beneath the fuselage. The crew carried parachutes and special cold-weather flight suits. A total of around 1,100 units were built. Most LVG aircraft were used by the German Air Service during the final operations of the First World War, especially on the Western Front, for reconnaissance and artillery spotting. The Model: The kit is by Wingnut Wings in 1/32 scale, and its quality is simply outstanding. The level of detail is superb. It includes a total of 166 plastic parts spread across seven sprues — one of them clear — each individually bagged to prevent friction. The kit also includes a photo-etched sheet for the seatbelts and four Cartograf decal sheets with *lozenge* patterns and markings for seven different aircraft. It only lacks a photo-etched part to simulate the cooling jackets of the machine guns, but apart from that, it’s an excellent, highly detailed kit with great potential for realistic finishes. LVG C.VI by Chema Martinez LVG C.VI by Chema Martinez LVG C.VI by Chema Martinez LVG C.VI by Chema Martinez LVG C.VI by Chema Martinez “Built for observation and endurance, the LVG C.VI reminds us that not all heroes in the sky carried bombs — some carried only their eyes and their courage.” — Chema M.
AICHI HANSA W.33
AICHI HANSA W.33 by Chema Martinez “From the North Sea to the Rising Sun” Designed by Ernst Heinkel one evening on the back of a cabaret wine list, the Hansa-Brandenburg W.29 was essentially an evolved version of the earlier W.12. With improved performance — thanks to reduced drag from a 50% wing reduction — it owed its strength to the rigid float and strut layout. It proved to be a worthy successor to the W.12 in its role of patrolling the North Sea and harassing RNAS seaplanes and British surface vessels. The aircraft later reached Japan as the *Hansa-Shiki Suijo Teisatsuki* — Navy Type Hansa Reconnaissance Seaplane — with between 156 and 310 units produced. It was powered by a Mitsubishi Type Hi (a licensed Hispano-Suiza) V-12, liquid-cooled engine generating between 170 and 210 HP. The “Navy Type Hansa” was built based on the Hansa-Brandenburg W.33, which Japan had received from Germany as part of its post–World War I reparation quota. The modifications to the original design were carried out by Nakajima, while the construction was shared between Nakajima and Aichi. By 1922, the Imperial Japanese Navy had decided to adopt this aircraft for series production. The original design by Dr. Ernst Heinkel was considered structurally advanced and delivered excellent performance. To better meet Japanese operational requirements, several changes were made in the domestic production versions. By 1922, the Imperial Japanese Navy had decided to adopt this aircraft for series production. The original design by Dr. Ernst Heinkel was considered structurally advanced and delivered excellent performance. To better meet Japanese operational requirements, several changes were made in the domestic production versions. Pilots, however, were not particularly fond of the Hansa, criticizing its handling, poor directional control, and limited visibility, among other shortcomings. These aircraft were the first reconnaissance seaplanes carried aboard the battleship *Nagato*, starting in 1926. Many remained in service until around 1927–1928, when they were replaced by the Yokosho and Nakajima Type 14 and Type 15 reconnaissance seaplanes. Once retired, some surplus Hansas were converted into single-passenger civilian transports by Japan Air Transport Research. The Idea: This model was built using the Wingnut Wings 1/32 Hansa-Brandenburg as a base. I reworked the entire nose section and replaced the engine with a 1/32 Roden Hispano-Suiza. The wings also feature several modifications. My original plan was to build one of the German versions offered in the kit, but while researching online, I noticed that all models of this aircraft looked surprisingly similar. That led me to search for something different. I discovered a Finnish version fitted with skis — in similar colors — and a Japanese version in white. The Japanese one instantly captivated me. Though information was scarce, I found enough to bring it to life. I knew the work ahead would be demanding but exciting: rebuilding the front section, replacing the engine, creating homemade stencils for the markings — all the perfect challenges to keep my enthusiasm high. AICHI HANSA W.33 AICHI HANSA W.33 by Chema Martinez AICHI HANSA W.33 by Chema Martinez AICHI HANSA W.33 by Chema Martinez AICHI HANSA W.33 by Chema Martinez AICHI HANSA W.33 by Chema Martinez “Sometimes, chasing a lesser-known story gives life to a model that feels truly unique — that’s where passion meets history.” — Chema M.
RE.8 HARRY TATE
RE.8 HARRY TATE by Chema Martinez “The Eyes of the Great War” The RE.8 was a British two-seat biplane used for reconnaissance and bombing missions during the First World War. It was designed by John Kenworthy to replace the more vulnerable BE2. The RE.8, however, proved harder to fly, and at first, it was met with reluctance by the Royal Flying Corps. Although it eventually provided reasonably satisfactory service, it was never considered an outstanding combat aircraft. Despite its limitations, the RE.8 became the standard British reconnaissance and artillery observation aircraft from mid-1917 until the end of the war. More than 4,000 units were produced, serving in nearly all theatres — including Italy, Russia, Palestine, Mesopotamia, and, of course, the Western Front. The Model: This 1/32 scale model by Wingnut Wings is, as usual for the brand, a superb kit with exceptional attention to detail. It offers five different marking options and consists of 295 plastic parts and 15 photo-etched pieces. The engine itself is a miniature model, beautifully designed, and the instruction manual — complete with clear photos — guides the build perfectly step by step. RE.8 HARRY TATE by Chema Martinez RE.8 HARRY TATE by Chema Martinez RE.8 HARRY TATE by Chema Martinez RE.8 HARRY TATE by Chema Martinez RE.8 HARRY TATE by Chema Martinez RE.8 HARRY TATE by Chema Martinez “Some aircraft may not have shined in combat, but they carried the silent duty of observation — and that, too, deserves to be remembered.” — Chema M.
FE.2B EARLY
FE.2B EARLY by Chema Martinez “The Project That Took Flight” This project first began to take shape during my very first visit to Scale Model World Telford in 2011. While wandering among the countless stands, I came across a couple of truly amazing books about this aircraft. As a WWI enthusiast and follower of the Wingnut Wings brand, I had already heard rumors that they were planning to release this model — so, the moment I saw those books, it was clear what my next project would be. A little over a month after returning from Telford, the New Zealand company launched the kit in two different versions: Early and Late. Unable to choose between them, I decided to buy both. That’s when this project began — one that, without a doubt, has tested every one of my modeling skills. The Project: Once the two kits were in my hands, I sat down comfortably on the sofa to enjoy and study both. The first step was to choose which aircraft to build. I went through all the markings and schemes from both versions, and since I felt like building a linen-colored aircraft, the Early version was the one. With the choice made, it was time to plan the build. Following the same approach as in my recent Wingnut Wings projects — and given the outstanding detail of both the interior and the engine — I decided that these two elements would be the main focus of this build. FE.2B EARLY by Chema Martinez FE.2B EARLY by Chema Martinez FE.2B EARLY by Chema Martinez FE.2B EARLY by Chema Martinez FE.2B EARLY by Chema Martinez FE.2B EARLY by Chema Martinez “Some projects begin as ideas, but end up becoming journeys — this one truly made me fly further as a modeler.” — Chema M.
LOHNER Type L, 1/32 – 100% Scratchbuilt
LOHNER Type L by Chema Martinez “From Plans to Wings” This is one of my latest completed project, built entirely from plans — 100% scratch. Without a doubt, it has been my greatest modeling challenge so far, a truly fascinating journey that I’ll surely repeat with other aircraft. Hope you like it. LOHNER Type L by Chema Martinez LOHNER Type L by Chema Martinez LOHNER Type L by Chema Martinez LOHNER Type L by Chema Martinez LOHNER Type L by Chema Martinez LOHNER Type L by Chema Martinez “Creating from nothing is the closest way to understand how these machines once came to life.” — Chema M.
BRISTOL F2B “THE CROCODILE”
BRISTOL F2B – “THE CROCODILE” “Inside the Spirit of a Great War Machine” For the foundation of this project, I used the Wingnut Wings 1/32 scale kit. The idea was to show an aircraft from that era from the inside. It has been a truly complex but fascinating job because of its difficulty — without a doubt, one of my greatest modeling challenges, from which I’ve learned an enormous amount for future projects. BRISTOL F2B – “THE CROCODILE” BRISTOL F2B – “THE CROCODILE” BRISTOL F2B – “THE CROCODILE” BRISTOL F2B – “THE CROCODILE” BRISTOL F2B – “THE CROCODILE” BRISTOL F2B – “THE CROCODILE” “This work was awarded the gold medal for Best 1/32 WWI Aircraft at Scale Model World Telford 2013.” — Chema M.
Spanish Air Force Award 2024: the Caudron G.III
CAUDRON G.III “A tribute in scale — honoring the Caudron that trained a generation of Spanish aviators.” A tribute to the 100 officers selected in February 1920 to undergo pilot training on Caudron G.III aircraft at elementary aviation schools such as Cuatro Vientos, Getafe, and Seville. This 1/32 scale plastic kit from Copper State Models has been meticulously refined with the addition of metal turnbuckles from Gaspach Models and an engine adapted using metal rods and copper wiring. The cockpit was scratch‑built and reconfigured into a dual‑control layout to reflect its use in training. Furthermore, the wings were modified to accurately represent the variant that served in the Spanish Air Force. CAUDRON G.III CAUDRON G.III CAUDRON G.III CAUDRON G.III CAUDRON G.III CAUDRON G.III “Each part of this model preserves the memory of those who learned to fly in it.” — Chema M.
Scale modeling with soul—focused on WWI aircraft and the craft behind every build.
Contact Info
Follow Us
© 2025 Wings & Rigging. All rights reserved.
